Genuine Parker TAIYO cylinders – clamp units, hydraulic and pneumatic cylinders
Parker TAIYO (Osaka, Japan) makes hydraulic cylinders, pneumatic cylinders, clamp units, Hi-Rotor rotary actuators and air grippers. Vietnam Tomita is the exclusive distributor of Parker TAIYO in Vietnam.

Parker TAIYO is a Japanese manufacturer of hydraulic and pneumatic equipment, known for its hydraulic cylinders, pneumatic cylinders, clamp units for jigs and fixtures, Hi-Rotor vane-type rotary actuators and air grippers. TAIYO products are found on machine tools, die-casting machines, injection moulding machines, special-purpose machines and assembly lines in Japanese factories worldwide.
Vietnam Tomita is the exclusive distributor of Parker TAIYO in Vietnam. Every cylinder, clamp unit and accessory we supply is genuine, imported directly from Japan with full import documents, and we help you build the correct ordering code (bore, stroke, mounting, rod end, switches) from your drawing or the code on the cylinder currently installed.
This page lists the Parker TAIYO series most used in Vietnam: clamp and safety cylinders for fixtures, compact and tie-rod hydraulic cylinders from 3.5 to 21 MPa (including 150 °C heat-resistant types and the two-stage die-casting core-pull cylinder), compact, guided, rodless and large tie-rod pneumatic cylinders, Hi-Rotor actuators, air motors and air grippers. Each series has a detail page (in Vietnamese) with key specifications and a quick quote button.
Clamp units, safety-lock cylinders and air grippers
JEH (hydraulic, 7 MPa) and JEA (pneumatic) clamp units for fixtures, the 10B-6 brake cylinder, the 10A-6L safety-lock cylinder and Parker TAIYO parallel and angular air grippers.
Pneumatic cylinder with brake – mid-stroke and emergency stop
Safety-lock pneumatic cylinder – holds the load when air is lost
Parallel air gripper with cross-roller guide, ±0.01 mm
Ultra-thin parallel air gripper, high gripping force
180°-opening angular air gripper, high gripping force
Spring-clamped mechanical parallel gripper – no air required
Parker TAIYO hydraulic cylinders
Compact hydraulic cylinders, small round cylinders, ISO tie-rod cylinders from 3.5 to 21 MPa, pipe-flange cylinders, mill-type cylinders for steel plants, heat-resistant cylinders and the two-stage die-casting core-pull cylinder.
Compact hydraulic cylinder, aluminium body, 10 MPa
Lightweight compact hydraulic cylinder, aluminium body
Double-acting hydraulic cylinder, 21 MPa – compact, light, improved cushioning
Two-stage hydraulic cylinder for die-casting core pulling
Mill-type heavy-duty hydraulic cylinder for steel plants
Heat-resistant compact hydraulic cylinder, 16 MPa, up to 150 °C
Heat-resistant tie-rod hydraulic cylinder, up to 150 °C
Parker TAIYO pneumatic cylinders
Compact, guided, rodless and round pneumatic cylinders, and heavy-duty tie-rod cylinders up to φ400 mm.
Compact pneumatic cylinder with switch – magnetic piston
JIS-standard compact pneumatic cylinder – switch recessed in the body
Non-rotating compact pneumatic cylinder – switch recessed in the body
Long-stroke compact pneumatic cylinder – up to 400 mm
Compact guided pneumatic cylinder – twin rigid guide rods
Stainless round-body pneumatic cylinder – band-mounted switches
Heavy-duty pneumatic cylinder – steel tie rods, φ32–φ250
Hi-Rotor rotary actuators and air motors
PRN Hi-Rotor vane-type rotary actuator, 35RP2 rack-and-pinion hydraulic rotary actuator, TAV3 vane-type and TAM4 radial-piston air motors.
Why buy PARKER TAIYO through Vietnam Tomita
The official channel in Vietnam – from selecting the code to import and technical support
Exclusive distributor
Vietnam Tomita is the official channel for Parker TAIYO in Vietnam – genuine products with clear documentation.
The right ordering code
We cross-check the code on your machine, your drawing or the nameplate so the cylinder you receive is the one you need.
Equivalent replacements
Advice on TAIYO series with interchangeable dimensions when replacing old cylinders or reducing installation space.
After-sales support
Seal kits, switches and mounting accessories, plus technical support during installation and maintenance.
Frequently asked questions about PARKER TAIYO
Where can I buy genuine Parker TAIYO cylinders in Vietnam?
Vietnam Tomita is the exclusive distributor of Parker TAIYO in Vietnam. Email [email protected] or message Zalo 0989 284 946 with the cylinder code or a photo of the nameplate for a quotation.
What is the difference between the JEH and JEA clamp units?
JEH is a 7 MPa hydraulic clamp unit; JEA is the pneumatic version with the same dimensions. Both have a short body that keeps fixtures compact, gasket-type seals at the rod cover and fixture face, and built-in proximity switches to confirm the clamped / unclamped state.
Does TAIYO make heat-resistant hydraulic cylinders?
Yes. HRST1 (compact, 16 MPa) and H8BT1 (tie-rod) work at ambient temperatures up to 150 °C; the version with the SW013 heat-resistant switch is rated to 130 °C.
What is the 150HD-1 two-stage cylinder used for?
150HD-1 is a two-stage double-acting cylinder for core pulling on die-casting machines: a small return cylinder inside shortens the cycle after the die opens and reduces oil consumption.
What should I send for the fastest quotation?
The full code printed on the cylinder nameplate (for example 160S-1 …), the quantity, or photos of the nameplate and the installation. If the nameplate is gone, send bore, stroke, mounting style and working pressure and we will cross-reference it.
Can TAIYO hydraulic cylinders replace the cylinders I use now?
Many TAIYO series follow ISO standards (for example 100H-2, 160H-1) or share mounting hole pitches across series (210S-1 with 100S-1 and 160S-1). Vietnam Tomita checks the actual dimensions before proposing a replacement.
Manufacturer website: www.taiyo-ltd.co.jp ↗
Need a PARKER TAIYO quotation? Send us the part code or drawing
Send us your part list – we reply within one working day.









































