MAGNEGRAPH non-destructive spot-weld testers – Nugget Profiler and Seam Seeker
Magnegraph (Nippon Kouatsu Electric, Aichi, Japan) develops magnetic non-destructive testing equipment: the Nugget Profiler for resistance spot welds and the Seam Seeker for locating weld seams on tubes. Vietnam Tomita is the exclusive distributor in Vietnam.

In body-in-white and automotive / motorcycle component welding shops, spot-weld quality decides the strength and safety of the whole structure. The hard part is what cannot be seen: whether the nugget – the zone that melted and solidified between the steel sheets – is large enough, or whether the joint is only a stick weld that looks normal on the outside but carries almost no load.
The usual answer has been destructive testing: chisel tests or peel tests. They give a visual result but destroy the part, cost material and time, and cover only a few samples per lot. Ultrasonic testing is non-destructive but needs couplant gel, struggles with oily surfaces and depends heavily on operator skill.
The NUGGET PROFILER from MAGNEGRAPH (Nippon Kouatsu Electric, Japan) approaches the problem magnetically: the probe measures the change in material structure at the weld to quantify the nugget diameter and separate good nuggets from stick welds – no gel, usable on oily surfaces, about 4 seconds per spot, with data saved automatically as CSV files that open in Excel. Built on the same magnetic technology, the SEAM SEEKER locates the weld seam on round tubes without contact.
Vietnam Tomita is the exclusive distributor of MAGNEGRAPH products in Vietnam: model selection, demonstration units and trial measurements on your own parts, operator training, and coordination of warranty and repairs with the manufacturer in Japan.
NUGGET PROFILER – spot-weld inspection
Non-destructive magnetic inspection of spot-weld nuggets on car bodies: handheld NPH03B and fixed NPF02.
Non-destructive spot-weld tester – measures the weld nugget by magnetic field (handheld NPH03B, fixed NPF02)
SEAM SEEKER – weld-seam locator for tubes
Finds the weld seam of round tubes magnetically, without contact and unaffected by oil, colour or lighting.
Non-contact weld-seam locator for round tubes, about 4 seconds per tube
Why buy MAGNEGRAPH through Vietnam Tomita
The official channel in Vietnam – from selecting the code to import and technical support
Exclusive distributor in Vietnam
Vietnam Tomita is the only official MAGNEGRAPH channel in Vietnam – genuine equipment and current technical information from the manufacturer.
Demo and trials on your parts
A demonstration unit measures your actual welded parts so you can judge the application before investing.
On-site operator training
We train QC engineers to measure, build reference data, read results and manage the CSV data so the equipment is productive quickly.
After-sales linked to Japan
Repairs are coordinated with the manufacturer in Japan; we supply probe protection plates and support annual performance checks.
Frequently asked questions about MAGNEGRAPH
Does the Nugget Profiler fully replace chisel and peel tests?
It quantifies nuggets across the whole production lot, so you can track variation and reduce the number of destructive samples. How far to replace destructive tests should be set by the plant according to its own quality standard.
Is couplant gel needed, like with ultrasonic testers?
No. The Nugget Profiler measures magnetically, so no couplant is needed and it still measures when the surface is oily.
How long does one spot take?
About 4 seconds per spot weld.
Which steels and thicknesses can be measured?
Steel from 270 MPa mild grades to 1280 MPa ultra-high-strength grades, galvanised or bare; sheet thickness 0.7–2.3 mm; nugget diameter 3–7 mm; two-sheet or three-sheet joints (three-sheet joints need access from both sides).
Can it inspect projection welds (nuts and bolts)?
No. The equipment supports resistance spot welds on carbon steel only.
Can I borrow a demo unit or rent the equipment?
Yes. Demo units and rental are arranged through the distributor – contact Vietnam Tomita to set up a trial.
Which languages does the software support?
Nugget Profiler: English, Spanish, Chinese and Japanese. Seam Seeker: English and Japanese.
Which materials does the Seam Seeker work on?
Steel-sheet tubes and SUS440; not aluminium, copper or SUS304.
Manufacturer website: magnegraph.com/eng ↗
Need a MAGNEGRAPH quotation? Send us the part code or drawing
Send us your part list – we reply within one working day.
